Hi-Tek Products Ltd. are the sole British distributors for the "Miccro" range of Tolber masking lacquers.
Tolber is solely engaged in the development and marketing of masking products for use in electroplating and anodising.
They are recognised as leaders in this field and their products are specified by leading U.S. aerospace and defence companies, the U.S. Air Force and Navy repair shops.
Our customers have the assurance of technical back-up from Tolber’s own masking specialists.
Product range available in multiples of 5 litre.
Miccro Super XP-2000
A peelable resist with extremely high resistance to difficult solutions, including electroless nickel, rhodium plating, hard anodizing and chemical milling.
It will also remain intact during nickel stripping operations.
It can be brushed or dipped, but is not suitable for spraying.
Due to the special polymer used, it is important to use only Super XP-2000 Thinners with this lacquer.
Primarily formulated to have outstandingly good performance in difficult acidic solutions.
It also performs well with electroless nickel, sulphuric anodizing, hard anodizing and even electropolishing.
It can be applied by brush, dip or spray, subject to adjusting the viscosity with Miccroshield Thinners.
Also suitable for application by silk screen methods where complex masking patterns are required and the shape is suited to this application method.
Miccromask
Regarded by many leading hard chromium depositors as the best stop-off lacquer available.
It is also suitable for lead plating and similar processes.
Its red colour is designed for easy visibility. It dries rapidly in air and can be brushed, dipped or sprayed.
If adjustment of the viscosity is required, only Miccromask Thinners should be used.
Miccrostop
This is a good general purpose lacquer that is designed for use when hairline demarcation is required.
It is suitable for use with high-speed copper, decorative chromium, cadmium, gold, nickel, silver, tin and zinc as well as alloy plating.
It can be applied by dipping, brushing or spraying.
Only Miccrostop Thinners should be used for this purpose.
Miccropeel
Developed primarily for use in hard chromium plating and other difficult solutions where removal of the coating by peeling rather than by solvents is required.
It gives a good ‘edge’ permitting hairline demarcation.
It can be applied by brushing or dipping, but for the latter, thinning with Miccropeel Thinners will be required.
Miccropeel Thinners are also need to be added for spray application.
Miccrowax
A long established masking wax, based on a single wax and not a blend of waxes.
It does not crack, adheres remarkably well even on flat surfaces, and is widely used for masking complicated parts and shapes requiring a clean edge.
Reusable.
Miccrotex
A shiny, black, air-dry rack coating chemically resistant to all plating and anodising solutions.
Designed to achieve maximum adhesion upon solvent evaporation.
The film remains tough and flexible.
A vinyl formulation, it is equally inert to acids and caustics.
Widely employed for patching, sealing, tank coating, water proofing and general anti-corrosion purposes.
Miccropatch
A high-solids, high viscosity, air-dry patching material for easy, fast repair of plastisol coatings.
Permits heavy build-up with fewest possible coats.
Resistant to all plating solutions, acids, alkalies, corrosive atmospheres.
